Germany-Bremen: Numerically-controlled machines for metal

Agency: TED
State:
Level of Government: State & Local
Category:
  • 34 - Metalworking Machinery
Opps ID: NBD00003595904783367
Posted Date: Oct 3, 2017
Due Date:
Solicitation No: 386772-2017
Source: Members Only
03/10/2017 S189 - - Supplies - Contract award notice - Open procedure

Germany-Bremen: Numerically-controlled machines for metal

2017/S 189-386772

Contract award notice

Results of the procurement procedure

Supplies

Directive 2014/24/EU

Section I: Contracting authority

I.1) Name and addresses
Universitat Bremen
Fachbereich 4, Produktionstechnik, Labor fur Mikrozerspanung, Badgasteiner Str. 2
Bremen
D-28359
Germany
Contact person: Prof. Dr.-Ing. habil. Prof. h.c. Dr.-Ing. E. h. E. Brinksmeier, M. Sc. Daniel Berger
Telephone: +49 42121851141
E-mail: d.berger@lfm.uni-bremen.de
Fax: +49 42121851119
NUTS code: DE501

Internet address(es):

Main address: www.uni-bremen.de

I.2) Joint procurement
I.4) Type of the contracting authority
Body governed by public law
I.5) Main activity
Education

Section II: Object

II.1) Scope of the procurement
II.1.1) Title:

Lieferung einer Ultraprazisionsschleifmaschine.

II.1.2) Main CPV code
42632000
II.1.3) Type of contract
Supplies
II.1.4) Short description:

Lieferung von:

1 Stuck Ultraprazisionsschleifmaschine.

II.1.6) Information about lots
This contract is divided into lots: no
II.1.7) Total value of the procurement (excluding VAT)
Lowest offer: 771 640.00 EUR / Highest offer: 799 000.00 EUR taken into consideration
II.2) Description
II.2.1) Title:
II.2.2) Additional CPV code(s)
II.2.3) Place of performance
NUTS code: DE501
II.2.4) Description of the procurement:

Die Ultraprazisionsschleifmaschine soll in der fertigungstechnischen wissenschaftlichen Forschung zur Erzeugung von Aspharen, Freiformflachen und Linsenarrays in sprodharten Werkstoffen mit geometrisch unbestimmter Schneide eingesetzt werden. Als Werkzeuge sollen sowohl Schleifstifte als auch Umfangsschleifscheiben eingesetzt werden konnen, was mithilfe von zwei angebotenen Schleifspindeln gewahrleistet werden soll. Da die Vielfalt des Aufbaus der eingesetzten Werkzeuge (Bindung, Korngroen, Profil) beim Ultraprazisionsschleifen gro ist, sollte die Werkzeugmaschine mit einer abseits der Werkstuckspindel integrierten Abrichtstation fur rotierende Abrichter ausgestattet sein, sodass die Einsatzvorbereitung der Werkzeuge dem jeweiligen Prozess angepasst werden kann. Auch die Moglichkeit zur Uberprufung des Profils und der Position von Werkzeug und Werkstuck sollte in Form von taktilen oder optischen Messsystemen zur Verfugung stehen. Fur die Erfassung der Prozesskrafte soll die Werkzeugmaschine eine Moglichkeit bieten, ein piezoelektrisches Messsystem (Dynamometer) zu integrieren. Des Weiteren ist eine Kapselung des Arbeitsraums vorzusehen, um eine Schleifbearbeitung mit Kuhlschmierstoff zu ermoglichen, ohne dass dieser in Funktionsteile der Werkzeugmaschine eindringen kann. Die Ruckfuhrung aus dem Arbeitsraum, die Filterung und die Temperierung des Kuhlschmierstoffs ist ebenfalls zwingend erforderlich.

II.2.5) Award criteria
Quality criterion - Name: Technischer Wert / Weighting: 60
Price - Weighting: 40
II.2.11) Information about options
Options: no
II.2.13) Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds: no
II.2.14) Additional information

Section IV: Procedure

IV.1) Description
IV.1.1) Type of procedure
Open procedure
IV.1.3) Information about a framework agreement or a dynamic purchasing system
IV.1.6) Information about electronic auction
IV.1.8) Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: yes
IV.2) Administrative information
IV.2.1) Previous publication concerning this procedure
Notice number in the OJ S: 2017/S 121-244675
IV.2.8) Information about termination of dynamic purchasing system
IV.2.9) Information about termination of call for competition in the form of a prior information notice

Section V: Award of contract

Contract No: 4700005315
Title:

Standard TTG350 machine

A contract/lot is awarded: yes
V.2) Award of contract
V.2.1) Date of conclusion of the contract:
11/09/2017
V.2.2) Information about tenders
Number of tenders received: 3
Number of tenders received from SMEs: 3
Number of tenders received from tenderers from other EU Member States: 2
Number of tenders received from tenderers from non-EU Member States: 0
Number of tenders received by electronic means: 0
The contract has been awarded to a group of economic operators: no
V.2.3) Name and address of the contractor
Cranfield Precision, Division of Fives Landis Ltd
3 Adam Close
Bedford
MK42 7JE
United Kingdom
NUTS code: UKH24
The contractor is an SME: yes
V.2.4) Information on value of the contract/lot (excluding VAT)
Initial estimated total value of the contract/lot: 838 673.00 EUR
Lowest offer: 771 640.00 EUR / Highest offer: 799 000.00 EUR taken into consideration
V.2.5) Information about subcontracting

Section VI: Complementary information

VI.3) Additional information:

1. Rugen sind ausschlielich an den unter I.1) genannten Auftraggeber zu senden.

2. Im bzw. in den Vergabeverfahren werden nur Post, Fax und E-Mail als Kommunikationsmittel zugelassen. Geben Sie dazu bitte immer die Vergabenummer UNI_HB_2017_LfM-0620 an.

3. Werden im Vergabeverfahren Bescheinigungen von Auftraggebern oder amtlichen Stellen gefordert, sind sie ? soweit sie nicht in deutsch verfasst wurden ? inklusive einer beglaubigten deutschsprachigen Ubersetzung einzureichen.

VI.4) Procedures for review
VI.4.1) Review body
Vergabekammer der Freien Hansestadt Bremen
Contrescarpe 72
Bremen
28195
Germany
Telephone: +49 42136110333
E-mail: vergabekammer@bau.bremen.de
VI.4.2) Body responsible for mediation procedures
VI.4.3) Review procedure
VI.4.4) Service from which information about the review procedure may be obtained
Vergabekammer der Freien Hansestadt Bremen
Contrescarpe 72
Bremen
28195
Germany
Telephone: +49 42136110333
E-mail: vergabekammer@bau.bremen.de
VI.5) Date of dispatch of this notice:
28/09/2017
03/10/2017 S189 - - Supplies - Contract award notice - Open procedure

Germany-Bremen: Numerically-controlled machines for metal

2017/S 189-386772

Contract award notice

Results of the procurement procedure

Supplies

Directive 2014/24/EU

Section I: Contracting authority

I.1) Name and addresses
Universitat Bremen
Fachbereich 4, Produktionstechnik, Labor fur Mikrozerspanung, Badgasteiner Str. 2
Bremen
D-28359
Germany
Contact person: Prof. Dr.-Ing. habil. Prof. h.c. Dr.-Ing. E. h. E. Brinksmeier, M. Sc. Daniel Berger
Telephone: +49 42121851141
E-mail: d.berger@lfm.uni-bremen.de
Fax: +49 42121851119
NUTS code: DE501

Internet address(es):

Main address: www.uni-bremen.de

I.5) Main activity
Education

Section II: Object

II.1) Scope of the procurement
II.1.1) Title:

Lieferung einer Ultraprazisionsschleifmaschine.

II.1.2) Main CPV code
42632000
II.1.3) Type of contract
Supplies
II.1.6) Information about lots
This contract is divided into lots: no
II.1.7) Total value of the procurement (excluding VAT)
Lowest offer: 771 640.00 EUR / Highest offer: 799 000.00 EUR taken into consideration
II.2) Description
II.2.1) Title:
II.2.2) Additional CPV code(s)
II.2.3) Place of performance
NUTS code: DE501

Section IV: Procedure

IV.2) Administrative information
IV.2.1) Previous publication concerning this procedure
Notice number in the OJ S: 2017/S 121-244675

Section V: Award of contract

Contract No: 4700005315
Title:

Standard TTG350 machine

A contract/lot is awarded: yes
V.2) Award of contract
V.2.1) Date of conclusion of the contract:
11/09/2017
V.2.3) Name and address of the contractor
Cranfield Precision, Division of Fives Landis Ltd
3 Adam Close
Bedford
MK42 7JE
United Kingdom
NUTS code: UKH24
The contractor is an SME: yes
V.2.4) Information on value of the contract/lot (excluding VAT)
Initial estimated total value of the contract/lot: 838 673.00 EUR
Lowest offer: 771 640.00 EUR / Highest offer: 799 000.00 EUR taken into consideration
V.2.5) Information about subcontracting

Section VI: Complementary information

VI.5) Date of dispatch of this notice:
28/09/2017
TI Title Germany-Bremen: Numerically-controlled machines for metal
ND Document number 386772-2017
PD Publication date 03/10/2017
OJ OJ S 189
TW Place BREMEN
AU Authority name Universitat Bremen
OL Original language DE
HD Heading - - Supplies - Contract award notice - Open procedure
CY Country DE
AA Type of authority 6 - Body governed by public law
HA EU Institution -
DS Document sent 28/09/2017
NC Contract 2 - Supplies
PR Procedure 1 - Open procedure
TD Document 7 - Contract award notice
RP Regulation 5 - European Union, with participation of GPA countries
PC CPV code 42632000 - Numerically-controlled machines for metal
OC Original CPV code 42632000 - Numerically-controlled machines for metal
RC NUTS code DE501
IA Internet address (URL) www.uni-bremen.de
DI Directive Public procurement Directive 2014/24/EU

TRY FOR FREE

Not a USAOPPS Member Yet?

Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.

Start Free Trial Today >