Sources Sought for 3D Printer
|Agency:||Department of the Army|
|Level of Government:||Federal|
|Posted Date:||Oct 3, 2017|
|Due Date:||Oct 10, 2017|
Solicitation Number :
Notice Type :
Added: Oct 03, 2017 2:53 pm(1) Action Code : SOURCES SOUGHT
This is a Sources Sought Notice only. This is not a request for proposal, but a survey to locate potential sources. This Sources Sought does not constitute an Invitation for Bids, Request for Proposals, or a Request for Quotations, and is not to be construed as a commitment by the Government to issue an order or otherwise pay for the information solicited, nor is it a guarantee of a forthcoming solicitation or contract. It is for market research purposes only. Respondents will not be notified of the results of the evaluation.
The purpose of this Sources Sought Notice is to gain knowledge of interest, capabilities, and qualifications of various members of industry, to include the Small Business Community: Small Business, Section 8(a), Historically Underutilized Business Zones (HUB-Zone), Service-Disabled Veteran-Owned Small Business (SDVOSB), Women-Owned Small Business (WOSB), and Economically Disadvantaged Women-Owned Small Business (EDWOSB). The Government must ensure there is adequate competition among the potential pool of responsible contractors. Small business, Section 8(a), HUBZone, SDVOSB, WOSB, & EDWOSB businesses are highly encouraged to participate.
(2) Date : 10 October 2017
(3) Classification Code : 36
(4) NAICS Code: 333244
(5) NAICS Size Standard: 750 Employees
(6) Contracting Office Address: 2800 Powder Mill Road
Adelphi, Maryland 20783
(7) Subject: Sources Sought for 3D Printer
(8) Proposed Solicitation Number: W911QX-18-T-0001
(9) Sources Sought Closing Response Date: 10/10/2017
(10) Contact Point: Ariel Amey, Contract Specialist, firstname.lastname@example.org or (301) 394-1081
To find sources that are qualified to meet the supplies/services as listed in section 11B. Note that the specific requirements in section B are subject to change prior to the release of any solicitation.
B. Salient Characteristics
The Contractor shall provide one (1) three-dimensional (3-D) resin jet machine with a water jet cleaning system and a solution cleaning system, fifteen (15) packs of 3.6 kilograms (kg) material cartridges for the machine, six (6) packs of 3.6 kg water jet cleanable support cartridge, and six (6) packs of 3.6 kg solution cleanable support cartridge, shipping, installation, and training at Aberdeen Proving Ground (APG), Maryland. The following are the minimum specifications of the Government:
CLIN 0001: One (1) unit 3-D resin jet machine
CLIN 0002: Fifteen (15) packs of 3.6 kilograms (kg) material cartridges for the machine
CLIN 0003: Six (6) packs of 3.6 kg water jet cleanable support cartridge
CLIN 0004: Shipping and Installation at Aberdeen Proving Ground (APG), MD 21005-5066
All interested parties should notify this office in writing, mail, fax, or e-mail within the posted date. Responses shall include:
(I) To what extent each of the specifications can be met.
(II) Include your type of business (i.e. commercial, academia), whether your organization is classified as a large or small business based on the 750 Employee standard that accompanies NAICS code 333244. If a small business, you must also list any small disadvantaged status you hold [HUBZone, 8(a), Service Disabled Veteran Owned Small Business (SDVOSB), Women Owned Small Business (WOSB), Economically Disadvantaged Women-Owned Small Business (EDWOSB), etc.].
(III) Past experience/ performance through the description of completed projects.
(12) Responses to this sources sought are due no later than 11:59 eastern standard time (EST) 10 October 2017. Submissions should be emailed to Ariel Amey at email@example.com. Faxed submissions can be sent to (301) 394-1609. Mailed submissions can be sent to the address in block 6, ATTN: Ariel Amey
Questions concerning this sources sought may be directed to Ariel Amey at firstname.lastname@example.org or (301) 394-1081. Please be advised that .zip and .exe files cannot be accepted.
Contracting Office Address :
2800 POWDER MILL RD
ADELPHI , Maryland 20783-1197
Place of Performance :
Primary Point of Contact. :
Ariel M. Amey
|Oct 23, 2017||[Combined Synopsis/Solicitation] 3D Printer|
|Dec 14, 2017||[Presolicitation] NOTICE OF INTENT TO SOLE SOURCE Stratasys, LTD manufactured 3-D Printer Bundle and Accessories|
|Dec 19, 2017||[Presolicitation] NOTICE OF INTENT TO SOLE SOURCE Stratasys, LTD manufactured 3-D Printer Bundle and Accessories|
TRY FOR FREE
Not a USAOPPS Member Yet?
Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.