EVALUATION AND OVERHAUL OF AN/SPQ-9B ROTARY JOINT SLIP RING ASSEMBLY, Cobham Part Number 1439B

Agency: Department of the Navy
State: Indiana
Level of Government: Federal
Category:
  • 58 - Communications, Detection and Coherent Radiation Equipment
Opps ID: NBD00159189001850722
Posted Date: Oct 6, 2017
Due Date:
Solicitation No: N0016417RWP28
Source: Members Only
Solicitation Number :
N0016417RWP28
Notice Type :
Award
Contract Award Date :
September 29, 2017
Contract Award Number :
N0016417DWP28
Contract Award Dollar Amount :
$1,243,168.00
Contractor Awarded Name :
Continental Microwave & Tool Inc., DBA Cobham Antenna Systems
Synopsis :
Added: Jun 29, 2017 2:14 pm

N00164-17-R-WP28 - EVALUATION AND OVERHAUL OF AN/SPQ-9B ROTARY JOINT SLIP RING ASSEMBLY, Cobham Part Number 1439B - FSC 5840 - NAICS 334419
Issue Date: 29 June 2017 - Closing Date: 13 July 2017 - 10:00 EST (EDT)
Attachments:
1. Drawing 6868537 Rev J
2. ISEA Qualification Criteria document number 89 PLN 17 9872

ITEM DESCRIPTION - The Naval Surface Warfare Center (NSWC), Crane Division intends to solicit and award a single five-year Indefinite Delivery Indefinite Quantity (IDIQ) Firm Fixed Price (FFP) contract for the overhaul/refurbishment of AN/SPQ-9B ROTARY JOINT SLIP RING ASSEMBLY, Cobham part number 1439B in accordance with the Statement of Work and Drawings.

This effort will be conducted on a limited source basis in accordance with the statutory authority 10 U.S.C. 2304(c)(1) as implemented by FAR 6.302-1(b)(1)(ii). The basis for restricting competition is Vendor Item Control Drawing number 6868537 Rev J (IAW ASME Y14.24), and lack of sufficient technical data. The Government intends to issue a request for proposals to two (2) sources: Continental Microwave & Tool Co Inc., DBA Cobham Antenna Systems, 11 Continental Drive, Exeter, NH, 03833-4564 and Diamond Antenna and Microwave Corporation, 59 Porter Road, Littleton, MA 01460. Award will be made to the responsible contractor whose offer represents the best value to the Government considering price, the ability to meet the technical requirements in accordance with the statement of work and past performance.

To be eligible for award, sources are required to become qualified in accordance with the ISEA standards and criteria set forth in document number 89 PLN 17. Even if not qualified in sufficient time for award of this procurement, interested sources are encouraged to seek qualification in preparation for potential follow on requirements for the same item.

The following Contract Line Items (CLINs) are anticipated:

CLIN 0001 - Evaluation and Standard Overhaul (contract minimum 1/ea), FFP

CLIN 0002 - Non-Standard Overhaul, FFP

CLIN 0003 - Supplemental Repair, FFP

CLIN 0004 - Evaluation only, Beyond Economical Repair (BER), FFP

CLIN 0005 - Data, Not Separately Priced.

The Government estimates that the IDIQ minimum will be a quantity of 1/ea CLIN0001. Delivery will be FOB Destination 300 Highway 361, Crane IN 47522. Selection shall extend to the Government a standard sales warranty provided such warranty is available at no additional cost to the Government.

The solicitation will be available for download on or about 01 August 2017. Interested parties can download the solicitation from the FBO website at http://www.fbo.gov; no hard copies of the solicitation will be mailed. Offers must be submitted in the format specified in the solicitation to be considered. Submitting a bid electronically using any "Submit Bid" feature or other electronic means does not guarantee offers will be received by the proper person or in the correct format. All changes to the requirement that occur prior to the closing date will be posted to FedBizOpps. It is the responsibility of interested vendors to monitor FedBizOpps for amendments that may be issued to this solicitation. For changes made after the closing date, only those offerors that provide a proposal will be provided any changes/amendments and considered for future discussions and/or award. Please reference the above solicitation number when responding to this notice.

Contractors must be properly registered in the System for Award Management (SAM) to be eligible for award. Offerors may obtain information on SAM registration and annual confirmation requirements by calling 1-866-606-8220 or via the internet at https://www.sam.gov.

Contractors must be properly registered in the Joint Certification Program (JCP) in order to receive controlled solicitation attachments. Information about the JCP is located at http://www.dlis.dla.mil.

Solicitation attachments will be posted to FedBizOpps at the same time the solicitation is posted. FedBizOpps may be accessed at http://www.fbo.gov.

Questions or inquiries should be directed to Mr. Eric Pulse, Code 0241, telephone 812-854-3298, e-mail eric.pulse@navy.mil. Please reference the above solicitation number when responding to this notice.

Added: Aug 24, 2017 3:24 pm

SOLICITATION AND CONTROLLED ATTACHMENTS
Added: Sep 15, 2017 2:27 pm

AMENDMENT 0001:

Reason for this amendment is to extend the closing date of the solicitation to Friday, 22 September 2017, at 12:00pm Eastern Standard Time.

Please consult the list of document viewers if you cannot open a file.
CONTROLLED ATTACHMENTS
Sensitive/Secure Package:
Yes
Label:
CONTROLLED ATTACHMENTS
Posted Date:
June 29, 2017
Login Required
CONTROLLED ATTACHMENTS
Sensitive/Secure Package:
Yes
Label:
CONTROLLED ATTACHMENTS
Posted Date:
August 24, 2017
Login Required
Solicitation 1
Type:
Solicitation
Posted Date:
August 24, 2017
17RWP28_Sol.pdf (1,002.21 Kb)
Description: SOLICITATION
Amendment 1
Type:
Mod/Amendment
Posted Date:
September 15, 2017
Description: AMENDMENT 0001
Contracting Office Address :
300 Highway 361
Building 3373
Crane, Indiana 47522-5001
United States
Primary Point of Contact. :

TRY FOR FREE

Not a USAOPPS Member Yet?

Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.

Start Free Trial Today >