SOLE SOURCE - Commercial - TROUBLE SHOOTING, REPAIR, UPGRADE, INVESTIGATION, PERFORMANCE IMPROVEMENT, SPARE ASSEMBLIES TO SUPPORT Model 177 HIGH VOLTAGE POWER SUPPLY (HVPS) GRID MODULATORS Part Number 95600-1
|Agency:||Department of the Navy|
|Level of Government:||Federal|
|Posted Date:||Jan 7, 2019|
|Due Date:||Feb 28, 2019|
Jan 07, 20191:37 pm
Solicitation Number :
Notice Type :
Added: Jan 07, 2019 1:37 pmN0016419RWP59 - SOLE SOURCE - Commercial - TROUBLE SHOOTING, REPAIR, UPGRADE, INVESTIGATION, PERFORMANCE IMPROVEMENT, SPARE ASSEMBLIES TO SUPPORT Model 177 HIGH VOLTAGE POWER SUPPLY (HVPS) GRID MODULATORS Part Number 95600-1 - FSC 6625 - NAICS 334515
Anticipated RFP Issue Date: 29 January 2019 - Closing Date: 28 February 2019 - 4:00 p.m. Eastern
Naval Surface Warfare Center (NSWC) Crane has a requirement to provide evaluations, trouble shooting, repair, upgrade, investigation, performance improvement, and spare assemblies for Model number 177 High Voltage Power Supply (HVPS) Traveling Wave Tube (TWT) Grid Modulator, part number 95600-1 modulators in support of government furnished test sets at NSWC Crane. This anticipated contract will be for a minimum quantity of one (1) and a maximum quantity to be determined. The estimated maximum contract value of this procurement is $2 million dollars. NSWC Crane plans to enter into a contract with Applied Engineering Services (ASE), Fort Worth, Texas.
The proposed contract action is for the supplies or services for which the Government intends to solicit and negotiate with one source, Applied Engineering Services (ASE), 7510 Benbrook Pkwy, Fort Worth, Texas, 76126. This requirement will be solicited on a sole source basis in accordance with 10 U.S.C. 2304(a)(2)(iii) under the authority of FAR 6.302-1, only one responsible source and no other supplies or services will satisfy agency requirements. The basis for restricting competition is substantial duplication of costs and unacceptable delays in fulfilling Navy requirements. ASE is the manufacturer of the HVPS and the existing design drawings are their proprietary information. Establishing alternative sources will result in unacceptable duplicative costs and substantial delays to run correlation tests, to require the high voltage shop to become familiar with the new modulator, and to validate the testing.
Procedures in FAR Part 12 will be used. This will be a five (5) year Firm Fixed Price (FFP), Indefinite delivery, Indefinite Quantity (IDIQ) contract. Required delivery will be specified by individual delivery orders with inspection and acceptance FOB destination at NSWC Crane Division, Crane, Indiana, 47522 within 30 days of receipt.
Contractors must be properly registered in the System for Award Management (SAM) and the Joint Certification Program (JCP) in order to receive the controlled attachments. Offerors may obtain information on SAM registration and annual confirmation requirements by calling 1-866-606-8220 or via the internet at https://www.sam.gov. Information about the JCP is located at https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/default.aspx . The controlled attachments will be posted to FedBizOps at the same time the solicitation is posted. FedBizOps may be accessed at http://www.fbo.gov. Offers must be submitted in the format specified in the solicitation to be considered.
All responsible sources may submit a capability statement which shall be considered by the agency. However, a determination by the Government not to compete with this proposed contract based upon responses to this solicitation is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.
All changes that occur prior to the closing date will be posted to the FedBizOpps website. For changes made after the closing date, only those offerors that provide a proposal will be provided any changes/amendments and considered for future discussions and / or award.
Questions or inquiries should be directed to Cheryl Biel, Code 0241, telephone 812-854-8530, e-mail firstname.lastname@example.org. Please reference the above solicitation number when responding to this notice.
THIS IS NOT A REQUEST FOR PROPOSAL
Contracting Office Address :
300 Highway 361
Crane, Indiana 47522-5001
Crane, Indiana 47522-5001
Primary Point of Contact. :
January 7, 2019
Feb 28, 2019 4:00 pm Eastern
Automatic, on specified date
April 15, 2019
Original Set Aside:
66 -- Instruments & laboratory equipment
334 -- Computer and Electronic Product Manufacturing/334515 -- Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
TRY FOR FREE
Not a USAOPPS Member Yet?
Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.