WRENCH, TORQUE

Agency: General Services Administration
State: Missouri
Level of Government: Federal
Category:
  • 51 - Hand Tools
Opps ID: NBD00159908836489874
Posted Date: Oct 5, 2017
Due Date: Oct 10, 2017
Solicitation No: N7-5120-01-650-6827
Source: Members Only
Solicitation Number :
N7-5120-01-650-6827
Notice Type :
Special Notice
Synopsis :
Added: Oct 05, 2017 11:43 am

5120-01-650-6827 UI: EA


WRENCH, TORQUE



DESCRIPTION



Type II: Setting


Class B: Nongraduated


Style 3: Interchangeable head connection


Design C: Counterclockwise torqueing


Torque Capacity: 12 to 21 inch-pounds


Torque Scale Graduation: Preset


Torque Signal: Feel Impulse


Overall Length, Handle: 5 inches


Material, Handle: Aluminum


Features: Open end wrench head size 18mm; blue painted handle




EXCEPTION(S) TO TECHNICAL DOCUMENT



Coatings: Shall be in accordance with SAE AS4984-2011; Coating Requirements for Aerospace Hand Tools.



ITEM MARKING



Each item Shall Be Marked in a Permanent and Legible Manner with:



1) Manufacturer's Part Number


2) Manufacturer's Name or Identifying Symbol, and


3) Country of Origin



Each Package including the unit, single, intermediate, and exterior container must be labeled with the requisition number or Transportation Control Number (TCN). Requisition Number and TCN are found on the Purchase Order.



PACKAGING



One (1) item shall be preserved and packaged in a unit package designed to protect the item against damage during shipment, handling, and storage.



MARKING



MARKING


In general, unless otherwise specified by the contracting officer, marking of shipments shall be in accordance with the GSAM provision/ Clause 552.211-73, marking. In more detail: Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123. That is, unit, intermediate, and transport packages shall be marked directly on the side surface of the package or on a label affixed to the package, with the identification marking as specified in the standard. Transport packages shall also have, in addition to the identification marking, a shipping label that includes the purchase order, contract, or the requisition numbers; as applicable, including the consignor and consignee names (i.e. ship from/ to), gross weight, cube and piece number.



Marking of supplies for deliveries to civilian activities, export locations, including commercial freight forwarders and third party logistics providers, and excluding freight entering the Defense Transportation System, shall be the same as deliveries to domestic locations except that the shipping label shall show on the same label, or another label affixed next to the shipping label, the ultimate consignee (i.e. Mark for AAC).



Marking of supplies for deliveries to domestic military activities shall comply with the latest edition of Military Standard 129. That is, unit, intermediate, and exterior or shipping containers shall be marked directly on the side surfaces of the package or on a label affixed to the package, with the identification marking as specified in the standard. Exterior or shipping containers shall also have in addition to the identification marking, a Military Shipping Label (MSL) per the standard.



Marking of supplies for deliveries to military activities, export locations, including forwarding and container consolidation points (CCPs) shall be the same as deliveries to domestic locations except that the MSL must also show the ultimate consignee (Mark for DoDAAC) and the Transportation Control Number (TCN).



"Latest version" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the Defense Logistics Agency's "Assist" Quicksearch web site: http://quicksearch.dla.mil/


SEEKING SUPPLIERS OF NSN: 5120-01-650-6827 WRENCH, TORQUE, QTY: 30, PLEASE SEE ATTACHED DOCUMENT FOR FULL ITEM DESCRIPTION. . BUY AMERICA ACT FAR 52.225.1.


Please also provide 1. Manufacturer 2. Foreign or Domestic Manufacturer: If Foreign what country? 3. Small or Large Manufacturer

Please consult the list of document viewers if you cannot open a file.
WRENCH, TORQUE
Type:
Other (Draft RFPs/RFIs, Responses to Questions, etc..)
Label:
WRENCH, TORQUE
Posted Date:
October 5, 2017
KM_RFQ.docx (46.07 Kb)
Description: 5120-01-650-6827 UI: EA
WRENCH, TORQUE

DESCRIPTION

Type II: Setting
Class B: Nongraduated
Style 3: Interchangeable head connection
Design C: Counterclockwise torqueing
Torque Capacity: 12 to 21 inch-pounds
Torque Scale Graduation: Preset
Torque Signal: Feel Impulse
Overall Length, Handle: 5 inches
Material, Handle: Aluminum
Features: Open end wrench head size 18mm; blue painted handle
EXCEPTION(S) TO TECHNICAL DOCUMENT

Coatings: Shall be in accordance with SAE AS4984-2011; Coating Requirements for Aerospace Hand Tools.

ITEM MARKING

Each item Shall Be Marked in a Permanent and Legible Manner with:

1) Manufacturer's Part Number
2) Manufacturer's Name or Identifying Symbol, and
3) Country of Origin

Each Package including the unit, single, intermediate, and exterior container must be labeled with the requisition number or Transportation Control Number (TCN). Requisition Number and TCN are found on the Purchase Order.

PACKAGING

One (1) item shall be preserved and packaged in a unit package designed to protect the item against damage during shipment, handling, and storage.

MARKING

MARKING
In general, unless otherwise specified by the contracting officer, marking of shipments shall be in accordance with the GSAM provision/ Clause 552.211-73, marking. In more detail: Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123. That is, unit, intermediate, and transport packages shall be marked directly on the side surface of the package or on a label affixed to the package, with the identification marking as specified in the standard. Transport packages shall also have, in addition to the identification marking, a shipping label that includes the purchase order, contract, or the requisition numbers; as applicable, including the consignor and consignee names (i.e. ship from/ to), gross weight, cube and piece number.

Marking of supplies for deliveries to civilian activities, export locations, including commercial freight forwarders and third party logistics providers, and excluding freight entering the Defense Transportation System, shall be the same as deliveries to domestic locations except that the shipping label shall show on the same label, or another label affixed next to the shipping label, the ultimate consignee (i.e. Mark for AAC).

Marking of supplies for deliveries to domestic military activities shall comply with the latest edition of Military Standard 129. That is, unit, intermediate, and exterior or shipping containers shall be marked directly on the side surfaces of the package or on a label affixed to the package, with the identification marking as specified in the standard. Exterior or shipping containers shall also have in addition to the identification marking, a Military Shipping Label (MSL) per the standard.

Marking of supplies for deliveries to military activities, export locations, including forwarding and container consolidation points (CCPs) shall be the same as deliveries to domestic locations except that the MSL must also show the ultimate consignee (Mark for DoDAAC) and the Transportation Control Number (TCN).

"Latest version" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the Defense Logistics Agency's "Assist" Quicksearch web site: http://quicksearch.dla.mil/
Contracting Office Address :
2300 Main
Kansas City, Missouri 64108
United States
Primary Point of Contact. :
Kristi M. Mummert
Phone: 8169261883

TRY FOR FREE

Not a USAOPPS Member Yet?

Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.

Start Free Trial Today >