Active

Contract Opportunity

Procurement Technical Assistance Centers (PTACs) are an official government contracting resource for small businesses. Find your local PTAC (opens in new window) for free government expertise related to contract opportunities.

THIS IS A SOURCES SOUGHT ANNOUNCEMENT. NO AWARDS WILL BE MADE FROM THIS SOURCES SOUGHT. NO SOLICITATION IS AVAILABLE AT THIS TIME. ANY ATTACHMENTS INCLUDED WITH SOURCES SOUGHT ARE FOR INFORMATIONAL PURPOSES ONLY AND ARE SUBJECT TO CHANGE. THE GOVERNMENT WILL NOT BE RESPONSIBLE FOR ANY COSTS INCURRED BY INTERESTED PARTIES IN RESPONDING TO THIS RFI. CONTACT WITH GOVERNMENT PERSONNEL OTHER THAN THOSE SPECIFIED IN THIS RFI BY POTENTIAL OFFERORS OR THEIR EMPLOYEES’ REGARDING THIS PROJECT IS PROHIBITED.

Description-

Protective coatings refer to paints, texturing, stains, varnishes, sealers, epoxies, and other surface applied products, whether used as primer, intermediate or finish coats on a variety of surfaces. Facilities refer to buildings, structures, roads, parking lots and related items that may require protective coatings. All work shall be performed in accordance with Federal, State, and local laws, standards and regulations, other specifications as identified in this SOW; all work shall be accomplished to meet or exceed industry or Government standards, whichever is more stringent. The Government will issue Task Orders and the Contractor shall accomplish work at line-item prices in accordance with the established with the contract.

Pavement Markings: The Contractor shall adhere to Federal standards for public roadways (or as directed by the CO or COR): U.S. Department of Transportation (DOT), Federal Highway Administration: Manual on Uniform Traffic Control Devices (MUTCD); Unified Facilities Guide Specifications (UFGS) 32 17 23: Pavement Markings. Pavement marking work may include painting or removing traffic lane striping, stop bars, bike lanes, words, crosswalks, directional arrows, handicap symbols, “no parking” areas and fire lanes.

General Scope:

NAICS-238320 Painting and Wall Covering Contractors; Size Standard: $19M

a) Surface preparation and painting (full or partial areas)

b) Taping, bedding, texturing of gypsum board/drywall

c) Repairing cracks, joints, and holes in walls and ceilings

d) Applying, removing, and re-applying acoustical material on walls and ceilings

e) Installing/removing vinyl/fabric wall covering or repairing wall covering

f) Wood stripping, staining, and/or varnishing

g) Concrete chipping and non-shrink repair at spalls and cracks

h) Water or sand blasting; sanding, grinding, scraping, stripping

i) Removal of dirt, mildew, fungus, and other foreign matter

j) Surface preparation on surfaces made of wood, metal, plastic, vinyl, concrete, brick, concrete block, stucco, asphalt and Exterior Insulation Finishing Systems (EIFS)

k) Protective coating application to facilities, including walls, ceilings, floors, doors and frames, window frames, fascia, soffits, trim, fences, gates, attachments (e.g. piping, exterior ductwork, rain gutters, etc.), pavement, roads, parking lots and curbing.

l) Application and removal of adhesive labels and reflective bands

m) Application of non-skid products (such as aluminum oxide) to concrete floors

n) Application of retro-reflective beads to pavement striping

Miscellaneous structures and equipment:

a) Fire hydrants and post indicator valves

b) Electrical switch gear and transformers

c) Signposts and structural stands

d) Stairs, handrails

e) Fences, gates, and bollards

f) Fuel and water tanks up to and including 4,000-gallon capacity (exterior only)

NOTE: bulk fuel storage area and elevated water storage tanks are NOT included

g) Fuel steel piping up to and including 1 inch in diameter

h) Water piping and electrical conduits

4. If you are a small business capable of providing the requirement described above, please provide the following information:

1. Name of company


2. UEI#


3. SAM expiration date


4. Small business status w/ certification dates


5. Bond Amount Contract/Aggregate


6. Contact POC


7. Phone#


8. Email


9. Address as stated on SAM registration


10. SBA Representative & their contact information


11. Brief capabilities statement to include plan to mitigate current industry issues with national supply chains and long lead times

If your firm is capable of providing the requirements described above, please provide a Capability Statement to SrA Josh lee by MARCH 24, 2013 @ 1600 MST. The Capability Statement should include general information and technical background describing your firm's experience for similar efforts.

Attachments/Links