Agency: Department of State
State: New Jersey
Level of Government: Federal
  • 59 - Electrical and Electronic Equipment Components
Opps ID: NBD00159788513840806
Posted Date: Sep 29, 2017
Due Date: Sep 28, 2017
Solicitation No: PR6750144
Source: Members Only
Solicitation Number :
Notice Type :
Combined Synopsis/Solicitation
Synopsis :
Added: Sep 18, 2017 4:56 am Modified: Sep 28, 2017 2:10 am Track Changes
CANCELLATION NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is PR6750144 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-95. The associated North American Industrial Classification System (NAICS) code for this procurement is 2005-95 with a small business size standard of 500.00 employees. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-09-28 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be NORTH BRUNSWICK, NJ 08902

The U.S. Embassy Islamabad, Pakistan requires the following items, Brand Name or Equal, to the following:
LI 001: Iota ISD-80 - Emergency Backup Ballast.

Self-Diagnostic - 90 min. - Operates Most 2 ft. - 8 ft. single, Bi-Pin, T8 and T12, HO or VHO and 2 ft. - 4 ft. 28W-54W T5 Lamps - 110/277 Volt Or equivalent, 40, EA;
LI 002: Iota I-32 - Emergency Backup Ballast.

Reduced Profile - 90 min. - Operates Most 2 ft. - 4 ft. single, Bi-Pin, T8 through T12 and 28W T5 lamps - 120/277 Volt Or equivalent, 30, EA;
LI 003: IOTA I-42-EM-B-DL Emergency Operation Ballast Damp Location 650 Lumens. Or equivalent, 30, EA;
LI 004: I-42-EM-B-DL BRAND: IOTA EMERGENCY BALLASTS Or equivalent, 40, EA;
LI 005: Philips Bodine B50 Emergency Lighting Ballast PD5C0001M Or equivalent, 30, EA;
LI 006: Philips Bodine BDL500 Fluorescent Emergency Ballast Or equivalent, 30, EA;
LI 007: Philips Bodine Emergency light BSL310C-DF Emergency LED driver Or equivalent, 30, EA;
LI 008: Philips Bodine B60LPU Or equivalent, 30, EA;
LI 009: BALLAST DISCONNCT, ORNG, 2 PORTS, 600V, PK25 Or equivalent, 40, EA;
LI 010: Low Profile Medium Base Bi-Pin 660W 600V Fluorescent Lamp holder With Quick wire Terminals, White Thermoplastic Or equivalent, 300, EA;
LI 011: LAMP HOLDER, 660 W LAMP - 13180-U Or equivalent, 100, EA;
LI 012: Ideal 30-103X Power Plug Disconnect 3-Wire Connector used excel Or equivalent, 50, EA;
LI 013: Sunlite 908 9W/T5/6V/CL/W 9aWatt 6aVolt Wedge Based Or equivalent, 100, EA;
LI 014: Expert Power EXP670 6 volt 7.0 Ah Rechargeable Battery Or equivalent, 80, EA;
LI 015: Push-In & Lever Wire Connector Kit Or equivalent, 10, EA;
LI 016: LH0565 - 26w 32w 42w G24q-3, GX24q-3 4 pin CFL threaded lamp holder/socket with 2 hole or cap mounting Or equivalent, 30, EA;
LI 017: ELECTRICAL BOX, SWITCH, STEEL, 18 CU. IN. RACO Mfr #: 591 Or equivalent, 60, EA;
LI 018: CONNECTOR, SQUEEZE, 90 DEG, 3/4 IN VALUE BRAND Mfr #: 3LV70 PRODUCT DESCRIPTION: Squeeze Clamp 90 Degree Connector, Conduit Size 3/4 Inch, NPT 3/4 Inch, Material Die Cast Zinc Or equivalent, 60, EA;
LI 019: CONNECTOR, SQUEEZE, STRAIGHT, 3/4 IN VALUE BRAND Mfr #: 3LV68 PRODUCT DESCRIPTION: Squeeze Clamp Straight Connector, Conduit Size 3/4 Inch, NPT 3/4 Inch, Material Die Cast Zinc Or equivalent, 60, EA;
LI 020: Southwire 55082305 3/4-Inch Alflex-Type RWA Reduced Wall Aluminum Flexible Metal Conduit 100a Or equivalent, 10, EA;
LI 021: Old Work Switch Box Mounting Holder - 820D1U-25R(Case of 25)Or equivalent, 10, EA;
LI 022: 12/3 MC Cable w/ Ground, 500ft - 1705B42TAFC Or equivalent

Each roll: 250 ft., 2, Roll;
LI 023: 12/4-Gauge x 500 ft. MC Lite Cable - 2106S42-01 Or equivalent

Each roll: 250 ft., 2, Roll;
LI 024: Light Cover Latch EG FX - White a Plastic LE00057 Or equivalent, 100, EA;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, U.S. Embassy Islamabad, Pakistan intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. U.S. Embassy Islamabad, Pakistan is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.
If this is a aBrand Name Onlya? procurement, Seller certifies that it is an authorized distributer of the brand name product being sold to the Department of State and that it has the certification/specialization level required by the manufacturer, to support both the product sale and product pricing, in accordance with applicable manufacturer certification/specialization requirements. Unless otherwise specified, Seller warrants that the products are new and in their original box(es).

In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. Submissions can be sent to clientservices@fedbid.com.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to FAR 4.1102 and other applicable regulations and guidelines. Information can be found at www.sam.gov. Registration must be "ACTIVE" at the time of award.

All Bids must be valid for 30 days from the closing date for this solicitation. No exceptions or qualifications.

New equipment ONLY, NO grey market or refurbished products. Items must be in original packaging, never used, and not altered in any way. Components of the requested equipment, to include memory, must be manufacturer-approved and may not be compatible, remanufactured, or refurbished equipment. All items must be covered by manufactureras warranty and procured through a manufacturer approved distribution channel. Sellers must be able to document their ability to provide items through manufacturer approved distribution channels upon request.

The Seller confirms to have sourced all products submitted in this Bid from manufacturer-approved channels for Federal sales, in accordance with all applicable laws and manufactureras current applicable policies at the time of purchase. Seller must be able to support both the product sale and product pricing, in accordance with applicable manufacturer certification / specialization requirements. If software is provided or included, Seller shall, upon request, provide Buyer with a copy of the End User License Agreement. Seller certifies that all software is licensed originally to Buyer as the original licensee authorized to use the software.

All bid prices must include shipping FOB Destination CONUS (CONtinental U.S.). No partial shipments are permitted, unless otherwise specified by Contracting Officer at time of award.

The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition.
The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acquisition.gov/far/
Contracting Office Address :
8100 Islamabad Place, Washington, DC 20521
Place of Performance :
Point of Contact(s) :
Name: Muzzamil Hussain, Title: Procurement Agent, Phone: 009251208, Fax: , Email: hussainm3@state.gov;

Related Document

Sep 18, 2017[Combined Synopsis/Solicitation] 59--PR6750144 - ISB-FAC PARTS FOR NEC COMPOUND ELECTRICAL SHOP. (7901.C)


Not a USAOPPS Member Yet?

Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.

Start Free Trial Today >