One (1) Versatile High Impact Energy Drop Tower
Agency: | DEPT OF DEFENSE |
---|---|
State: | Maryland |
Level of Government: | Federal |
Category: |
|
Opps ID: | NBD00159896396374356 |
Posted Date: | Apr 24, 2024 |
Due Date: | May 1, 2024 |
Solicitation No: | W911QX24Q0120 |
Source: | Members Only |
APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.
APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.
The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).
- Contract Opportunity Type: Sources Sought (Original)
- All Dates/Times are: (UTC-04:00) EASTERN STANDARD TIME, NEW YORK, USA
- Original Published Date: Apr 24, 2024 06:08 am EDT
- Original Response Date: May 01, 2024 11:59 am EDT
- Inactive Policy: 15 days after response date
- Original Inactive Date: May 16, 2024
-
Initiative:
- None
- Original Set Aside:
- Product Service Code:
-
NAICS Code:
-
Place of Performance:
Aberdeen Proving Ground , MD 21005USA
A. Objective:
To find sources that are qualified to meet the supplies/services as listed in section 11B. Note that the specific requirements in section C are subject to change prior to the release of any solicitation.
B. Please see the below salient characteristics:
- Shall be capable of delivering energy at least 4,000 foot-pounds (ft-lbs.).
- Height adjustable crosshead with drop height not to exceed ten (10) feet.
- Automated crosshead height measurement system.
- Available additional weight increments between 40 to 50 lbs.
- Strain gage base instrumented 58/64 HRC (hardness Rockwell C) steel adaptable threadbase Tup with 0.5-inch radius striker.
- Tup max force measurement of at least 50,000 lb.
- 100,000 ft-lb independent kinetic energy measurement capability.
- Impact Velocity measurement system.
- Test specimen support for American Society of Testing Materials (ASTM) E604 with notch centering.
-
Data acquisition and control computer with integrated software, to include:
- Minimum Data acquisition rate of four (4) mega-hertz (MHz).
- Force versus time/displacement; velocity versus time.
- Windows ten (10) or greater
- CPU: 13th-Gen Intel Core i5 - i9
- Graphics: Intel UHD Graphics 770 - NVIDIA GeForce RTX 3090
- RAM: 16GB - 32GB DDR5
- Storage: 2TB - 4TB SSD
- 27-inch monitor
- Motorized carts return with hand-held controller.
- Automated and adjustable height limiting sensor with motor kill switch.
- Test area dimension of at least 18”x18”x18”, to include T-sloted base with six (6) ½ inch 20 thread pitch drilled and taped holes for fixturing in test area.
- Interlocked safety enclosure.
- Safety/Rebound brake.
- Warning lights and Lockout Safety system.
- Overall height of no more than twelve (12) feet.
- Base footprint not to exceed the useable area of 58” x 58” on the existing concrete pad that is presently in the laboratory.
- Delivery date of three (3) months after award and not to exceed five (5) days of on-site installation at Aberdeen Proving Ground (APG), MD 21005.
- One (1) day on site training for up to five (5) personnel at APG, MD 21005.
- KO BLDG 102 AMSSB ACC 2800 POWDER MILL RD
- ADELPHI , MD 20783-1197
- USA
- Zachary Dowling
- zachary.a.dowling2.civ@army.mil
- Phone Number 5206729587
- Salma Williamson
- salma.k.williamson.civ@army.mil
- Phone Number 5206730329
TRY FOR FREE
Not a USAOPPS Member Yet?
Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.