BB3 Pump Assemblies

Agency: Department of the Air Force
State: Tennessee
Level of Government: Federal
Category:
  • 43 - Pumps and Compressors
Opps ID: NBD00159908616735085
Posted Date: Oct 5, 2017
Due Date: Oct 12, 2017
Solicitation No: AEDC-18-0001
Source: Members Only
Solicitation Number :
AEDC-18-0001
Notice Type :
Sources Sought
Synopsis :
Added: Oct 05, 2017 12:20 pm
THIS IS A SOURCES SOUGHT NOTICE ONLY. This sources sought does not constitute an invitation for Bids, Request for Proposal, nor Request for Quotation, and is not to be construed as a commitment by the Government to issue a contract or otherwise pay for the information requested.

This Sources Sought supports market research in support of the performance, design, fabrication, and verification requirements for three horizontal axially split, multistage, between bearings pump/driver assemblies. The pumps shall be furnished with one or more stages removed to meet a guaranteed operating condition with the future capability to add the stages to obtain a second operating condition. The furnished pump drivers shall be suitable for operation at stated operating conditions and shall meet or exceed all requirements of API 541. The pump assemblies shall be delivered as a complete assembly, to include the pump, coupling, driver, baseplate, and all related piping systems or hardware, to Arnold Air Force Base, TN.


The Draft specification is provided to allow interested offerors to fully understand the requirement and determine if their firm can meet the specifications for the between bearings pump/driver assemblies.


Vendors interested in this opportunity are instructed to provide a capabilities statement to the Point of Contact(s) listed below and ensure the follow information is included:



1. Company Name
2. Point of Contact (include address and telephone number)
3. Duns & Bradstreet Unique Numbering System (DUNS) number
4. Commercial and Government Entity (CAGE) code
5. NAICS under which their firm is registered
6. Business Size (i.e. large or small) and any category of small business, if applicable


Arnold Engineering Development Complex (AEDC) at Arnold Air Force Base, TN, operates more than 55 aerodynamic and propulsion wind tunnels, rocket and turbine engine test cells, environmental chambers, arc heaters, ballistic ranges, sled tracks, centrifuges and other specialized units. AEDCs mission is to support National Defense by conducting developmental test and evaluation for the Nation through modeling, simulation, ground and flight test.


Please consult the list of document viewers if you cannot open a file.
Draft Spec
Type:
Other (Draft RFPs/RFIs, Responses to Questions, etc..)
Label:
Draft Spec
Posted Date:
October 5, 2017
Description: Draft SPECIFICATION FOR
API 610 TYPE BB3 AXIALLY SPLIT, MULTISTAGE, BETWEEN-BEARINGS PUMP ASSEMBLIES
Contracting Office Address :
100 Kindel Drive, Suite A-335
Arnold AFB, Tennessee 37389-1335
United States
Place of Performance :
100 Kindel Dr Ste A332
Arnold AFB, Tennessee 37389
United States
Primary Point of Contact. :
Miriam James,
Contracting Officer
Phone: 9314544406

TRY FOR FREE

Not a USAOPPS Member Yet?

Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.

Start Free Trial Today >