Two year contract for a supply of heavy-duty industrial rainwear
| Agency: | State Government of Louisiana |
|---|---|
| State: | Louisiana |
| Level of Government: | State & Local |
| Category: |
|
| Opps ID: | NBD11472868171891869 |
| Posted Date: | Jan 31, 2024 |
| Due Date: | Feb 15, 2024 |
| Solicitation No: | JPP-50-00144277 |
| Source: | Members Only |
| bid number | description | date issued | bid open date/time | help |
| JPP-50-00144277 |
Two year contract for a supply of heavy-duty industrial rainwear
for all divisions of Jefferson Parish Department of Public Works Original: JPP-50-00144277 |
01/31/2024 |
02/15/2024
2:00:00 PM CT |
JPP |
Attachment Preview
BID NUMBER- 50–00144277
Two (2) Year Contract for A Supply of Heavy-Duty Industrial Rainwear
for All Divisions of Jefferson Parish Department of Public Works
BID DUE: February 15, 2024 AT 2:00 PM
ATTENTION VENDORS!!!
Please review all pages and respond accordingly, complying with all provisions
in the technical specifications and Jefferson Parish Instructions for Bidders and
General Terms and Conditions. All bids must be received on the Purchasing
Department’s eProcurement site, www.jeffparishbids.net, by the bid due date
and time. Late bids will not be accepted.
Jefferson Parish Purchasing Department
200 Derbigny Street
General Government Building, Suite 4400
Gretna, LA 70053
Purchasing Specialist II Name: SHANNA FOLSE
Purchasing Specialist II Email: sfolse@jeffparish.net
Purchasing Specialist II Phone: 504-364-2680
A TWO (2) YEAR CONTRACT FOR A SUPPLY OF HEAVY-
DUTY INDUSTRIAL RAINWEAR FOR ALL DIVISIONS OF
THE JEFFERSON PARISH DEPARTMENT OF PUBLIC
WORKS.
BID # 50-00144277
All items are to be of domestic United States of America manufacture only.
Imported items will not be accepted as equal to that which is specified herein.
VENDORS BIDDING ON PRODUCT OTHER THAN SPECIFIED MUST
INCLUDE BRAND AND PART NUMBER FOR EACH ITEM ON THEIR
BID FORM. THE SPECIFICATIONS FOR THEIR BID PRODUCTS
MUST BE SUBMITTED WITH THE BID. FAILURE TO DO SO WILL
RESULT IN BID REJECTION.
The quantities of items shown on the proposal form are representative quantities
estimated for usage over a Two (2) year period. However, actual usage may be
more or less, dependent upon need.
Rainwear which is delivered in defective condition, I.E. leaking, poor construction,
loose threading, etc. will be picked up and replaced by the vendor at no additional
cost to the Parish.
All rain suits will be constructed from materials that are flame retardant, mildew
resistant, non-conductive, tear and abrasion resistant, and flexible in cold weather.
All rain suits will be 100% waterproof. All rain suits will be domestically
manufactured.
The following technical specifications describe the Series 300 and Series 500
rainwear, as manufacturer by Neese Industries, Inc. Gonzales, LA.
1
***Series 300 Rainwear***
(Bid Item Nos. 0001 thru 0022)
1. MATERIALS:
A. 100% polyvinylchloride (PVC) coated nylon. PVC is extruded on inside
surface and outside surface.
B. Denier and Fiber: 210 Denier, type 66
C. Thread count: 17 x 17 plus or minus 1
D. Thread type: 50 D cord
E. Weave Type: SCRIM
F. Weight (OZ/SQ yd): Total 9.0
Fabric: 1.5 Coating: Min 1.5
G. Thickness: 10.5 Mill or .0105 in.
H. Coating Adhesion: 5 x 5
I. Color: Yellow
2. GENERAL PROPERTIES:
A. Hardware: All snaps, buttons, and buckles are to be non-conductive, non-
corrosive and intrinsically safe. Material shall be high impact nylon I.E. Delrin.
B. Seams: All seams are to be dielectrically welded.
2
3. SPECIFIC PROPERTIES:
A. Flame retardant: Material must be flame retardant per NFPA 701. Material
must self-extinguish within 2 seconds after removing ignition source and char
average length cannot exceed 4.5 inches.
B. Chemical Resistance: Material must have excellent resistance to inorganic and
organic acids, salts, and alkalis.
C. Temperature Spectrum: Material must maintain flexibility within the -25
degrees Fahrenheit to 150 degrees Fahrenheit range.
D. Hydrostatic Resistance: Material must have hydrostatic resistance of equal to
or greater than 80 PSI per federal standard 191 method 5512 (Mullen)
E. Material Strength:
Tensile strength: 80 PSI x 75 PSI per federal standard 199 method (5100)
Tongue tear: 30 PSI x 35 psi per federal standard 191 5134.1 (Mullen)
4. JACKET DESCRIPTION: ALL JACKETS MUST INCLUDE THE
FOLLOWING:
A. 30 inch length
B. 2-1/2 inch storm fly front
C. Batwing Sleeve Construction
D. Hood has to be permanently attached. Also, hood must be oversized to
accommodate protective headgear and have drawstring closure.
3
5. PANTS DESCRIPTION:
All overalls must include the following:
A. Standard style pants, fly front with drawstring waist
B. Bib style overall, fly front with 1-1/2 inch width elastic suspender
(Bid Items Nos. 0023 thru 0034)
1. MATERIAL:
A. 100 percent polyvinyl chloride coated polyester
B. Weave type: Circular knit
C. Weight (oz. /sq. /yd.): Total 10.0
Fabric 8.0 coating: Min. 2.0
D. Thickness: 12 mill. or 0.012 inch.
E. Color: yellow
2. GENERAL PROPERTIES:
A. Hardware: All snaps, buttons and buckles are to be non-conductive. Non-
corrosive and intrinsically safe. Material shall be high impact nylon I.E. Delrin
B. Seams: all seams are to be dielectrically welded.
3. SPECIFIC PROPERTIES:
A. Flame Retardant: Material must be flame retardant per NFPA 701 material
must self-extinguish within 2 seconds after removing ignition source and average
char length cannot exceed 4.5 inches.
4
This is the opportunity summary page. You are currently viewing an overview of this opportunity and a preview of the attached documentation.
For more information, please visit the Publication URL Web page.
TRY FOR FREE
Not a USAOPPS Member Yet?
Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.