Description Re-Bid D5 Joint Sealant

Back Print

Agency:	State Government of Illinois
State:	Illinois
Level of Government:	State & Local
Category:	49 - Maintenance and Repair Shop Equipment Z - Maintenance, Repair or Alteration of Real Property
Opps ID:	NBD14067907565990844
Posted Date:	Apr 26, 2024
Due Date:	May 6, 2024
Solicitation No:	Bid Solicitation # 24-494DOT-FINAD-B-42832
Source:	Members Only

Header Information

Bid Number:

24-494DOT-FINAD-B-42832

Description:

Re-Bid D5 Joint Sealant

Bid Opening Date:

05/06/2024 11:00:00 AM

Purchaser:

Deidre Evans

Organization:

DOT - Transportation

Department:

FINADMIN494 - Finance & Administration

Location:

AK002 - Business Services

Fiscal Year:

Type Code:

95 - Small Purchase

Allow Electronic Quote:

Yes

Alternate Id:

Required Date:

Available Date
:

04/26/2024 08:03:35 AM

Info Contact:

Bid Type:

OPEN

Informal Bid Flag:

Purchase Method:

Open Market

Pre Bid Conference:	Re-Bid D5 Joint Sealant
Bulletin Desc:

Ship-to Address:

Deidre Evans
See Line Item Below
Springfield, IL 00000
US
Email: deidre.evans@illinois.gov
Phone: (217)785-1669

Bill-to Address:

Deidre Evans
See Line Item Below
Springfield, IL 00000
US
Email: deidre.evans@illinois.gov
Phone: (217)785-1669

Print Format:

Bid Print New

File Attachments:

standard-illinois-certifications-v.23.1 (5).docx
standard-terms-and-conditions~92.pdf

Form Attachments:

Required Quote Attachments


Desired Attachment Name:	Standard Illinois Certifications					Description:	Standard Illinois Certifications

SPO Name:

Shea Firebaugh

Is this a Small Business Set Aside Procurement?:

Is there a BEP/VBP Participation Goal? :

Link to Original Contract :

Questions:

Question #	Print Sequence	Required	Question	Response
1	1.0	Yes	Did you complete and attach the Standard Illinois Certifications.

Item Information

Item # 1:

(

745

-
56

)

District 5 needs Hot Poured Joint Sealant that meets all requirements of ASTM D6690 (AASHTO M324), Type II Joint and Crack Sealants, Hot-Applied, for Concrete and Asphalt Pavements (formerly ASTM D3405 and AASHTO M301). ASTM D6690 (AASHTO M324) Specs: Cone Penetration - 90 max Softening Point - 176 degrees F (80 degrees C) min. Resilience - 60% min. Bond, -20 degrees F (-29 degrees C), 50% ext. - Pass 3 cycles Asphalt Compatibility - Compatible Minimum Application Temperature - 380 degrees F (193 degrees C) Maximum Heating Temperature - 400 degrees F (204 degrees C) This should be a hot-applied asphalt based product used to seal and fill cracks and joints in asphalt or Portland cement concrete pavements in hot to cold climates. The product should be supplied in solid form which when melted and properly applied forms a resilient, adhesive and flexible compound that resists cracking in the winter and is resistant to flow and pick-up at summer temperatures. IDOT must receive this within 2 business days of receiving the PO. The quoted price shall be F.O.B. destination, freight prepaid. Deliver to Chris Franken, 500 East Lafayette Street, Bloomington, IL 61701

NIGP Code:

745-56
Joint Sealants: Asphalt, Elastomeric Materials, Glass Filament, Impervious Membranes, Plastic, Rubber, Silicones, Water Stops, etc.

Qty

Unit Cost

UOM

Total Discount Amt.

Total Cost

45,000.0

LB - US Pound

Manufacturer:

Brand:

Model:

Make:

Packaging:

Additional NIGP Code

:

Item # 2:

(

745

-
56

)

District 5 needs Hot Poured Joint Sealant that meets all requirements of ASTM D6690 (AASHTO M324), Type II Joint and Crack Sealants, Hot-Applied, for Concrete and Asphalt Pavements (formerly ASTM D3405 and AASHTO M301). ASTM D6690 (AASHTO M324) Specs: Cone Penetration - 90 max Softening Point - 176 degrees F (80 degrees C) min. Resilience - 60% min. Bond, -20 degrees F (-29 degrees C), 50% ext. - Pass 3 cycles Asphalt Compatibility - Compatible Minimum Application Temperature - 380 degrees F (193 degrees C) Maximum Heating Temperature - 400 degrees F (204 degrees C) This should be a hot-applied asphalt based product used to seal and fill cracks and joints in asphalt or Portland cement concrete pavements in hot to cold climates. The product should be supplied in solid form which when melted and properly applied forms a resilient, adhesive and flexible compound that resists cracking in the winter and is resistant to flow and pick-up at summer temperatures. IDOT must receive this within 2 business days of receiving the PO. The quoted price shall be F.O.B. destination, freight prepaid. Deliver to Ryan Kohnert, 201 Eisener Road, Champaign, IL 61822